#Hdd fan control monitor install
#Hdd fan control monitor full

The default parameters will run fans at 100% speed at temperatures > 50вЊ, and run them a 20% speed if < 30вЊ, which corresponds to the usual recommended drive operating temperature. If you use both fancontrol and HDD fancontrol, be careful not to make them control the same fans. The fancontrol daemon is not needed for HDD fan control to operate. HDD fancontrol and fancontrol are unrelated.

#Hdd fan control monitor install

On Ubuntu and other Debian derivatives, it is part of the fancontrol package, that you can install with sudo apt-get install fancontrol. To query fan characteristics, you may also need pwmconfig. Install HDD Fan control: python3 setup.py install.If you don't already have it, install setuptools for Python 3.On Ubuntu and other Debian derivatives: sudo apt-get install hdparm hddtemp. Install HDD Fan control: pip3 install hddfancontrol.If you don't already have it, install pip for Python 3.Some Linux distributions have a hddfancontrol package available in their repository: Most motherboards and SATA drives fit these requirements. exposes to the OS a sensor to query fan speed.exposes to the OS a PWM to control fan speed.

A least one SATA hard drive, that supports:.Can also optionally monitor CPU temperature, and control fan speed accordingly.Can be configured to never set the fans below a certain speed (useful if the fans controlled by HDD Fan control are the only ones available in the chassis).

#Hdd fan control monitor full

Can be set to stop fans or run them at full speed at customizable temperatures.Can adapt to different fan characteristics.

Can automatically spin down drives after a customizable period of inactivity.Can control several fans and/or several drives with a single invocation.It that case the CPU will generate less heat than the hard drives and it makes sense to control fan speed according to the main heat source. ARM or Intel Atom) with passive cooling (no fans), and a chassis with fans close to the hard drive.

The ideal use case is for a NAS with several hard drives, a low power CPU (ie. HDD Fan control is useful when you have one or several hard drives with one or several fans close to them, and do not want to let the motherboard control the fan speed, because it does so either statically, or using a temperature sensor unrelated to the real drive temperature (either on the CPU or on some other place on the motherboard).

it also minimizes power consumption at the same time.

it minimizes noise generated by the fans.

it allows maintaining your hard drives in the ideal temperature range to have maximum longevity and avoid overheatingД«ecause fans will slow down or stop when not needed:.

HDD Fan control is a command line tool to dynamically control fan speed according to hard drive temperature on Linux.